- Home
- Equipment
Refine by
Poly Products Environmental Equipment & Supplies
7 equipment items found
Manufactured by:Poly Products, Inc. - A Senney Enterprises Company based inCleveland, OHIO (USA)
Poly Products is proud to introduce the Poly Products Corro-Fan™. Poly Products has used this fan most commonly as the air mover of the Companion Condenser™., but it has found its own place as a premier in line Tube Axial Fan for any application where corrosive air needs to be ...
Manufactured by:Poly Products, Inc. - A Senney Enterprises Company based inCleveland, OHIO (USA)
POLY PRODUCTS INC offers an optional AirScrubber (Mesh Pad) to reduce the already minimal air emissions from the Poly Products EVAPORATIVE TANK™ by an additional 98%. The AirScrubber (Mesh Pad) consists of a 2” thick, knitted, polyethylene mesh pad with a spray wash-down system. The spray wash uses about 4 gallons of water per ...
Manufactured by:Poly Products, Inc. - A Senney Enterprises Company based inCleveland, OHIO (USA)
The Poly Products Evaporative Tank is available in two models, the ET-II-W and the ET-III-W. Each of these are ideally suited for dewatering spent solutions or wastewater that may have a high solids content. The evaporation mechanism eliminates any small, entrapping passages. Up AND down-draft spraying at very high flow rates produces high evaporation at moderate ...
Manufactured by:Poly Products, Inc. - A Senney Enterprises Company based inCleveland, OHIO (USA)
The cake from a filter press can be reduced by as much as 4:1 by utilizing a sludge ...
Manufactured by:Poly Products, Inc. - A Senney Enterprises Company based inCleveland, OHIO (USA)
These systems are more compact. The smaller versions are ideal for small spaces, or for small runs. They have the same closed loop capacity ideally suited for dewatering spent solutions or wastewater that may have a high solids content. The MINI series is a more compact version and does not include platform and ...
Manufactured by:Poly Products, Inc. - A Senney Enterprises Company based inCleveland, OHIO (USA)
A filter press is used anywhere there is a need to separate heavy solids from a liquid. Most times the slurry will be pumped from the bottom of a clarifier cone or a sludge thickening tank into a filter press. The end result of the particulate accumulated from a filter press becomes a filter cake. Filter press with polypro plates for solids removal ranging from .5-100 cubic feet ...
Manufactured by:Poly Products, Inc. - A Senney Enterprises Company based inCleveland, OHIO (USA)
The Poly Products Evaporator System evaporates water from process solutions and waste waters under atmospheric conditions. The highest evaporation rate can be achieved by heating the solution prior to pumping it into the evaporator. This is accomplished by using our heated tank with either a gas-fired burner, steam coil or electric heater. The patented (#4790904) ET Evaporative Tank ™ is ...
